• Free Shipping Across the USA
  • Free 3D Mockup
  • Free Design Support
  • No Hidden Charges
0 Cart

Your cart is currently empty.

Request A QuoteGet Quote
Free Tool

Box Template Generator

Pick a box style, enter your size and download a free dieline with cut, fold and bleed lines, drawn at actual size in SVG and PDF.

Template settings

1Box style

2Inside size L x W x D

in
in
in
Length and width are the sides of the opening. Depth is the height of the box.

3Material Sets the fold allowance

4Show on template

What Is a Box Dieline?

A dieline is the flat layout of a box before it is cut and folded. Printers and designers use it to place the artwork in exactly the right spot, so the logo lands on the front panel, the text reads the right way up and the colors run all the way to the edges. This generator draws the dieline for your exact inside size, so you can start designing straight away.

How to Read the Template

LineWhat it means
Solid redCut line. This is the outer shape the board is cut to, plus any slots.
Dashed blueFold line. The board is creased here and folded into the box.
Green areaBleed. Extend background colors and images to the outer edge of the green area, 1/8 inch past the cut.
Dashed greenSafe area. Keep logos and text inside it, 1/8 inch away from every cut and fold.
Grey stripesGlue area. Leave it free of ink and varnish so the glue holds.

How to Use the Template in Illustrator or Inkscape

  1. Open the SVG or PDF. It is drawn at actual size, so do not scale it.
  2. Keep the dieline on its own layer at the top, and put your artwork on a layer below it.
  3. Run backgrounds into the bleed. Any color or photo that touches a cut edge should extend to the edge of the green bleed area.
  4. Keep important content in the safe zone. Place logos and text at least 1/8 inch inside every cut and fold line so nothing gets trimmed or lands on a crease.
  5. Check the panel labels. Front, back, sides and lids are named on the template, so you can see which way each panel faces once the box is folded.

Which Box Style Should You Choose?

  • Reverse tuck end: the most common retail carton. The top lid hinges from the back and the bottom lid from the front, which makes it easy to run on folding lines. See tuck end boxes.
  • Straight tuck end: both lids hinge from the back panel, so the front panel stays clean. A good choice for window cutouts and wide front artwork.
  • Mailer box: a one-piece corrugated box with double side walls and a front tuck lid, made for ecommerce and subscription boxes. See mailer boxes.
  • 1-2-3 bottom: a snap lock base that holds heavier products than a tuck bottom. See 1-2-3 bottom boxes.
  • Auto-lock bottom: a tuck top with a crash lock base. The bottom flaps are pre-glued at the factory, so the base locks itself as soon as the box is opened and holds heavier products. The hatched triangles show the glue areas. See tuck end boxes.
  • Pillow box: a slim box with curved ends that fold in along curved score lines, popular for gift cards, jewelry and small favors. The thickness comes from the curve, so it stays slim. See pillow boxes.
  • Two-piece box: a base tray and a separate lid that slides over it, popular for gifts and premium products. The template draws both pieces on one sheet. See two-piece boxes.

Not sure about the size yet? Measure your product with the Box Size Calculator, or let the Box Style Finder suggest a style.

Frequently Asked Questions

What is a box dieline?

A dieline is the flat outline of a box before it is folded. It shows where the board is cut, where it is folded and where the artwork has to extend so the printed box has no white edges.

Which size should I enter, inside or outside?

Enter the inside size of the box, written as Length x Width x Depth. That is the space your product gets. The template adds the extra board for lids, tucks and flaps around it.

What is bleed and why is it 1/8 inch?

Bleed is extra artwork that runs past the cut line. Cutting is never perfectly exact, so the background is extended 1/8 inch beyond the cut so no unprinted edge shows on the finished box.

Can I print my box from this template?

Use it to plan and design your artwork. Board thickness, the exact lock and flap shapes and the printing process can change the final dieline slightly, so check every size before printing. When you order with us, our team checks your artwork and you get a free 3D mockup to approve before anything is printed.

Which programs can open the files?

The SVG file opens in Adobe Illustrator, Inkscape, Affinity Designer, CorelDRAW and Figma. The PDF opens in any PDF viewer and in Illustrator. Both are drawn at actual size.

My box style is not in the list. What can I do?

Request a free quote and tell us the style and size you need. We offer free design support and can help you with the right template for your box.

Template ready? Let us print the box.

Free design support, a free 3D mockup, MOQ 100 boxes and free shipping in the USA.

Get a Free Quote